Cisco Model-Driven Telemetry and Datadog Integration

Input and output integration overview

The Cisco Model-Driven Telemetry (MDT) plugin facilitates the collection of telemetry data from Cisco networking platforms, utilizing gRPC and TCP transport mechanisms. This plugin is essential for users looking to implement advanced telemetry solutions for better insights and operational efficiency.

The Datadog Telegraf Plugin enables the submission of metrics to the Datadog Metrics API, facilitating efficient monitoring and data analysis through a reliable metric ingestion process.

Integration details

Cisco Model-Driven Telemetry

Cisco model-driven telemetry (MDT) is designed to provide a robust means of consuming telemetry data from various Cisco platforms, including IOS XR, IOS XE, and NX-OS. This plugin focuses on the efficient transport of telemetry data using either TCP or gRPC protocols, offering flexibility based on the network environment and requirements. The gRPC transport is particularly advantageous as it supports TLS for enhanced security through encryption and authentication. The plugin is compatible with a range of software versions on Cisco devices, enabling organizations to leverage telemetry capabilities across their network operations. It is especially useful for network monitoring and analytics, as it enables real-time data collection directly from Cisco devices, enhancing visibility into network performance, resource utilization, and operational metrics.

Datadog

This plugin writes to the Datadog Metrics API, enabling users to send metrics for monitoring and performance analysis. By utilizing the Datadog API key, users can configure the plugin to establish a connection with Datadog’s v1 API. The plugin supports various configuration options including connection timeouts, HTTP proxy settings, and data compression methods, ensuring adaptability to different deployment environments. The ability to transform count metrics into rates enhances the integration of Telegraf with Datadog agents, particularly beneficial for applications that rely on real-time performance metrics.

Configuration

Cisco Model-Driven Telemetry

[[inputs.cisco_telemetry_mdt]]
 ## Telemetry transport can be "tcp" or "grpc".  TLS is only supported when
 ## using the grpc transport.
 transport = "grpc"

 ## Address and port to host telemetry listener
 service_address = ":57000"

 ## Grpc Maximum Message Size, default is 4MB, increase the size. This is
 ## stored as a uint32, and limited to 4294967295.
 max_msg_size = 4000000

 ## Enable TLS; grpc transport only.
 # tls_cert = "/etc/telegraf/cert.pem"
 # tls_key = "/etc/telegraf/key.pem"

 ## Enable TLS client authentication and define allowed CA certificates; grpc
 ##  transport only.
 # tls_allowed_cacerts = ["/etc/telegraf/clientca.pem"]

 ## Define (for certain nested telemetry measurements with embedded tags) which fields are tags
 # embedded_tags = ["Cisco-IOS-XR-qos-ma-oper:qos/interface-table/interface/input/service-policy-names/service-policy-instance/statistics/class-stats/class-name"]

 ## Include the delete field in every telemetry message.
 # include_delete_field = false

 ## Specify custom name for incoming MDT source field.
 # source_field_name = "mdt_source"

 ## Define aliases to map telemetry encoding paths to simple measurement names
 [inputs.cisco_telemetry_mdt.aliases]
   ifstats = "ietf-interfaces:interfaces-state/interface/statistics"
 ## Define Property Xformation, please refer README and https://pubhub.devnetcloud.com/media/dme-docs-9-3-3/docs/appendix/ for Model details.
 [inputs.cisco_telemetry_mdt.dmes]
#    Global Property Xformation.
#    prop1 = "uint64 to int"
#    prop2 = "uint64 to string"
#    prop3 = "string to uint64"
#    prop4 = "string to int64"
#    prop5 = "string to float64"
#    auto-prop-xfrom = "auto-float-xfrom" #Xform any property which is string, and has float number to type float64
#    Per Path property xformation, Name is telemetry configuration under sensor-group, path configuration "WORD         Distinguished Name"
#    Per Path configuration is better as it avoid property collision issue of types.
#    dnpath = '{"Name": "show ip route summary","prop": [{"Key": "routes","Value": "string"}, {"Key": "best-paths","Value": "string"}]}'
#    dnpath2 = '{"Name": "show processes cpu","prop": [{"Key": "kernel_percent","Value": "float"}, {"Key": "idle_percent","Value": "float"}, {"Key": "process","Value": "string"}, {"Key": "user_percent","Value": "float"}, {"Key": "onesec","Value": "float"}]}'
#    dnpath3 = '{"Name": "show processes memory physical","prop": [{"Key": "processname","Value": "string"}]}'

 ## Additional GRPC connection settings.
 [inputs.cisco_telemetry_mdt.grpc_enforcement_policy]
  ## GRPC permit keepalives without calls, set to true if your clients are
  ## sending pings without calls in-flight. This can sometimes happen on IOS-XE
  ## devices where the GRPC connection is left open but subscriptions have been
  ## removed, and adding subsequent subscriptions does not keep a stable session.
  # permit_keepalive_without_calls = false

  ## GRPC minimum timeout between successive pings, decreasing this value may
  ## help if this plugin is closing connections with ENHANCE_YOUR_CALM (too_many_pings).
  # keepalive_minimum_time = "5m"

Datadog

[[outputs.datadog]]
  ## Datadog API key
  apikey = "my-secret-key"

  ## Connection timeout.
  # timeout = "5s"

  ## Write URL override; useful for debugging.
  ## This plugin only supports the v1 API currently due to the authentication
  ## method used.
  # url = "https://app.datadoghq.com/api/v1/series"

  ## Set http_proxy
  # use_system_proxy = false
  # http_proxy_url = "http://localhost:8888"

  ## Override the default (none) compression used to send data.
  ## Supports: "zlib", "none"
  # compression = "none"

  ## When non-zero, converts count metrics submitted by inputs.statsd
  ## into rate, while dividing the metric value by this number.
  ## Note that in order for metrics to be submitted simultaenously alongside
  ## a Datadog agent, rate_interval has to match the interval used by the
  ## agent - which defaults to 10s
  # rate_interval = 0s

Input and output integration examples

Cisco Model-Driven Telemetry

1. Real-Time Network Monitoring: Utilize the Cisco MDT plugin to collect network performance metrics from Cisco routers and switches. By feeding telemetry data into a visualization tool, network operators can observe traffic trends, bandwidth usage, and error rates in real-time. This proactive monitoring allows teams to swiftly address issues before they affect network performance, resulting in a more reliable service.

2. Automated Anomaly Detection: Integrate Cisco MDT with machine learning algorithms to create an automated anomaly detection system. By continuously analyzing telemetry data, the system can identify deviations from typical operational patterns, providing alerts for unusual conditions that may signify network problems or security threats, which can aid in maintaining operational integrity.

3. Dynamic Configuration Management: Leveraging the telemetry data collected from Cisco devices, organizations can implement dynamic configuration management solutions that automatically adjust network settings based on current performance indicators. For instance, if the telemetry indicates high utilization on certain links, the system could dynamically route traffic to underutilized paths, optimizing resource usage.

4. Enhanced Reporting and Analytics: Use the Cisco MDT plugin to feed detailed telemetry data into analytics platforms, enabling comprehensive reporting on network health and performance. Historical and real-time analysis can guide decision-making and strategic planning, helping organizations to allocate resources more effectively and understand their network’s operational landscape better.

Datadog

1. Real-Time Infrastructure Monitoring: Use the Datadog plugin to monitor server metrics in real-time by sending CPU usage and memory statistics directly to Datadog. This integration allows IT teams to visualize and analyze system performance metrics in a centralized dashboard, enabling proactive response to any emerging issues, such as resource bottlenecks or server overloads.

2. Application Performance Tracking: Leverage this plugin to submit application-specific metrics, such as request counts and error rates, to Datadog. By integrating with application monitoring tools, teams can correlate infrastructure metrics with application performance, providing insights that enable them to optimize code performance and improve user experience.

3. Anomaly Detection in Metrics: Configure the Datadog plugin to send metrics that can trigger alerts and notifications based on unusual patterns detected by Datadog’s machine learning features. This proactive monitoring helps teams swiftly react to potential outages or performance degradation before customers are impacted.

4. Integrating with Cloud Services: By utilizing the Datadog plugin to send metrics from cloud resources, IT teams can gain visibility into cloud application performance. Monitoring metrics like latency and error rates helps with ensuring service-level agreements (SLAs) are met and also assists in optimizing resource allocation across cloud environments.

Feedback

Thank you for being part of our community! If you have any general feedback or found any bugs on these pages, we welcome and encourage your input. Please submit your feedback in the InfluxDB community Slack.